Omron V320-F Series Connection Manual page 40

7.3.7. Going Online and Transferring the Protocol Macro Data
Go online with the CX-Protocol and transfer the protocol macro data to the Serial
Communications Unit.
Double-click
1
OMRON_V320_V330_V430_P
MCR_V100
in
workspace to open the tree.
Select Edit PC-PLC Comms
2
Settings from the PLC Menu.
The Change PLC Dialog Box is
3
displayed. Select the PLC type
from the Device Type pull-down
menu, and click Settings.
* In this document, CJ2M is
used.
The Device Type
4
Dialog Box is displayed. Select
the CPU type from the CPU
Type pull-down menu, and click
OK.
* In this document, CPU11 is
used.
the project
Settings
7. Connection Procedure
37