Omron V320-F Series Connection Manual page 75

9.6.5. Send Message Settings
The send message settings are shown below.
Note
For details on the Send Message settings, refer to 3-4 Communication Message Attributes in
the CX-Protocol Operation Manual (Cat. No. W344).
Send Message Setting Screen
● Settings for Send Message "SD_RDCODE"
Settings
"< >"
(1)
No. Code
(1) "< >"
Send Message Command Format
This is the command format of messages sent from the SCU unit to the code reader
according to the "SD_RDCODE" setting.
"<"(#3C) " "(#20)
Command
Header
"< >"
Terminator
* A setting that is referred to as "Footer" on the code reader corresponds to "Terminator" in the
protocol macro data. Hereinafter, it is referred to as "Terminator".
Message data: ASCII constant, Data: "< >"
">"(#3E)
Number of
bytes
0 None
3 Fixed: "< >" (#3C203E) (Read trigger command)
0 None
Description
Description
9. Program
72