Omron V320-F Series Connection Manual page 28

In the Change PLC Dialog Box,
8
confirm that USB is selected in
Network Type, and click OK.
* If USB is not selected in
Network Type, select USB
from the pull-down menu.
* If you change the PLC type in
step 6 or CPU type in step 7,
a confirmation dialog box as
shown in the figure on the
right will appear. Click Yes.
Then, confirm
program has been correctly
converted (i.e., 0 errors is
shown).
(Although the figure on the
right shows
output warnings, there is no
particular problem.)
With Programs selected in the
9
project workspace, select Work
Online from the PLC Menu.
that the
Duplicated
7. Connection Procedure
25