Omron V320-F Series Connection Manual page 26

7.3.2. Loading the Project File and Going Online with the PLC
Start the CX-Programmer, load the project file, and go online with the PLC.
Install the CX- Programmer and USB driver on the PC beforehand.
Make sure that the PC and PLC
1
are connected with the USB
cable, and turn ON the power
supply to the PLC.
Start the CX-Programmer.
* If a user account control dialog
box is displayed at startup,
select the option to start.
Select Open from the File
2
Menu.
The Open CX-Programmer
3
Project Dialog Box is displayed.
Select
OMRON_V320_V420_V430
_PMCR232C_V100.cxp and
click Open.
* Obtain the latest version of the
project file from the OMRON
website.
After the loading of the project
4
file is completed,
Programs in
workspace.
select
the project
(Project workspace)
7. Connection Procedure
23