Omron V320-F Series Connection Manual page 63

9.4.2. Fixed CIO Area and Related Auxiliary Area Addresses
The tables below show area addresses that are required to execute the program.
● CIO Area
The following address allocations cannot be arbitrarily changed since they are fixed by the
unit address (unit number) setting for the SCU unit.
In the program, the unit number is set to "0".
Address
1518.15
1518
1519.10
1519.11
1519.15
1519
Note
For details on the CIO Area of the SCU unit, refer to 2-3-2 CIO Area in 2-3 I/O Memory
Allocations in the CJ-series Serial Communications Boards/Units Operation Manual (Cat. No.
W336).
● Related Auxiliary Area
The following related Auxiliary Area address allocation cannot be arbitrarily changed
because it corresponds to the communications port (internal logical port) specified in the
program (by the PMCR instruction operand).
The program uses communications port No. 7 (internal logical port).
Address
A202.07
Note
For the related Auxiliary Area used for PMCR instructions, refer to Serial Communications
Instructions (PMCR) in Section 3 Instructions in the CJ-series Instructions Reference Manual
(Cat. No. W474).
Data type
BOOL TransmissionError_SCU_0_P2
WORD TransmissionErrorStatus_SCU_0_P2
BOOL SequenceAbout_SCU_0_P2
BOOL SequenceEnd_SCU_0_P2
BOOL ProtocolMacroExecuting_SCU_0_P2
UINT ProtocolMacroErrorCode_SCU_0_P2
Data type
BOOL CommunicationsPortEnabledFlag_P7
9. Program
Variable name
Variable name
60