Using The Acp_Dialup File - Bay Networks Remote Annex User Manual

Chapter 3 Understanding Erpcd

Using the acp_dialup File

3-18
Remote Annex Server Tools for Windows NT
4. Use the Services control panel to stop or pause erpcd.
5. Use the admin utility's reset annex security command to reset
security for the Remote Annexes whose keys you added or
changed.
6. Use the Services control panel to restart erpcd.
The acp_dialup file stores user names, Remote Annex names and
addresses, and port numbers. Erpcd matches Annex and user entries to
provide IP addresses for users dialing in to the network. It denies access
to users if it does not find a matching entry.
To use the information in acp_dialup, you must set the
dialup_addresses parameter to
Remote Annex to search the acp_dialup file for the remote client's
user name and for local and remote addresses.
To create an entry in the acp_dialup file:
1. Open the acp_dialup file from the Bay Networks program
group window by double-clicking on the appropriate icon.
The acp_dialup file opens in the Notepad editor.
2. Go to the end of the file and enter a user name. If
authentication is performed with multiple domain
controllers, enter the domain name and the user name like
this:
domain-name\\user-name
via the na utility. This allows a
Y
®
User Guide