Bay Networks Remote Annex User Manual page 17

3. If you selected RADIUS as your security protocol, select the
Authentication Server and Accounting Server in the RADIUS
Servers list box.
If you selected Native NT from the Regime list box, skip this
step.
If the only options available in these two drop–down lists
is local and same as authentication server you need to
create a list of servers from which to choose. For more
information on this procedure, see Configuring a
RADIUS Authentication and Accounting Server, later in
this section.
4. If you selected Native NT as your regime, select the Global
Group Authentication check box.
You must select this box if you want to use Windows NT
global groups to authenticate users. If you do not select it,
the system will authenticate user names and passwords only.
5. If you selected Native NTand want to create a default remote
users group, select the Create Remote Users Group check box
to create the default Remote Users Group availability.
If want to create a new Remote Users Group, see
Remote Users Group
6. If you selected Native NT, select an existing domain from the
Domain field.
When you select a domain, the groups within that domain
appear in the Groups list box.
7. If you selected Native NT, select a name from the Groups list
box.
8. Use Add to move the group you selected to the Remote
Access Groups list box.
Remote Annex Server Tools for Windows NT
Chapter 2 Selecting Server Tools Options
later in this section.
®
User Guide
®
Creating a
2-3