at_zone
5.
Enter an IP address for the gateway that is the next hop for
the route.
If you enter an asterisk, the Remote Annex uses the port's
remote address as the gateway.
6.
If necessary, you can enter a number from 1 to 15 to indicate
the number of hops to the destination or
the route is hardwired.
You can skip this step. You do not have to enter a number of
hops or
.
-h
7.
Type
.
end
The at_zone attribute lists AppleTalk zones on a network. To use this
attribute:
1.
Open the acp_userinfo file from the Bay Networks program
group window by double-clicking on the appropriate icon.
The acp_userinfo file opens in the Notepad editor.
1.
Go to the area of the file where entry information resides
and type
at_zone
2.
Enter one or more zone names.
If you use more than one zone name, separate names using
spaces (e.g.,
at_zone zone1 zone2
characters; you cannot use non-printable characters. If you enter
a name that contains spaces, you must enclose the entire name
in double quotation marks.
3.
Type
.
end
Remote Annex Server Tools for Windows NT
Chapter 3
.
). Zone names use 1-32
®
User Guide
Understanding Erpcd
to indicate that
-h
3-13