Bay Networks Remote Annex User Manual page 40

Chapter 3 Understanding Erpcd
climask
3-8
Remote Annex Server Tools for Windows NT
4. Type .
end
You can repeat the line you created in Steps 1-3 if you want to
use more than one CLI command. Erpcd executes CLI
commands in the order in which they appear.
5. Add
clicmd...end
command.
You can use this line only if you want to continue the CLI
session after erpcd executes the last CLI command.
You cannot use clicmd unless you set the cli_security parameter to
. You should not include the same CLI command in the clicmd and
Y
climask entries.
The climask attribute limits the CLI commands a user can execute. To
use this attribute:
1. Open the acp_userinfo file from the Bay Networks program
group window by double-clicking on the appropriate icon.
The acp_userinfo file opens in the Notepad editor.
2. Go to the area of the file where entry information resides
and type
climask
3. Enter one or more CLI commands. If you enter more than
one command, separate commands with spaces.
4. Type to conclude the climask entry.
end
You can use include files in place of repeated climask entries. To use
these files, type
stored in the same directory as is the acp_userinfo file.
following the last line that lists a CLI
.
and the file name. Include files must be
include
®
User Guide