Bay Networks Remote Annex User Manual page 42

Chapter 3 Understanding Erpcd
3-10
Remote Annex Server Tools for Windows NT
2. Go to the area of the file where entry information resides
and type
filter
3. Enter a filter definition.
4. Type .
end
You can repeat the line you created in Steps 1-3 if you want to
use more than one filter. Erpcd executes filter attributes in the
order in which they appear.
Each filter definition includes categories for direction, scope, family,
criteria, and actions. You must separate each part of the filter definition
with a space.
• Direction applies the filter to incoming or outgoing packets.
You can enter
as well as outgoing packets, you must create two separate
definitions.
• Scope controls how erpcd matches the filter definition. You
can enter
include
match the definition, or
packets that do not meet the definition.
• Family, an optional part of the definition, specifies the
protocol to which the filter applies. Currently, the system
supports only
.
or . To apply a filter to incoming
input output
to apply the filter only to packets that
to apply the filter only to
exclude
.
ip
®
User Guide