Bay Networks Remote Annex User Manual page 39

clicmd
The acp_userinfo file can store one or more accesscode attributes in a
user profile. To create an accesscode entry:
1. Type
accesscode
For IPX clients, you must enter
2. Type
phone_no
phone_no 634-5789
If you do not enter a phone number, the system prompts the user
for it. You can enter
system prompts the user for a phone number, drops the
connection, and calls the user at that number.
3. Type
in_pool
pool (e.g.,
in_pool inboundpool1
4. Type
out_pool
pool (e.g.,
out_pool outboundpool1
5. Type followed by one CLI command, its arguments, and
job
.
end
You do not need to enter a job specification.
6. Type .
end
The clicmd attribute allows you to list CLI commands that erpcd will
execute if the profile matches. To use this attribute:
1. Open the acp_userinfo file from the Bay Networks program
group window by double-clicking on the appropriate icon.
The acp_userinfo file opens in the Notepad editor.
2. Go to the area of the file where entry information resides
and type
clicmd
3. Enter a single user or superuser CLI command or the name
of an existing macro defined for a Remote Annex.
Remote Annex Server Tools for Windows NT
Chapter 3
followed by a code name.
for the access code.
IPX
followed by an actual phone number (e.g.,
).
for IPX clients so that the
charge_back
followed by the name of an inbound modem
).
followed by the name of an outbound modem
.
®
User Guide
Understanding Erpcd
).
3-7