Using The Acp_Keys File - Bay Networks Remote Annex User Manual

Chapter 3 Understanding Erpcd

Using the acp_keys File

3-16
Remote Annex Server Tools for Windows NT
The acp_keys file stores Remote Annex names or IP addresses and
corresponding encryption keys. Erpcd uses the keys you define here to
create encryption keys that the security server and a Remote Annex use
to exchange messages. When the security server receives an encrypted
message from a Remote Annex, it matches the key with an associated
Remote Annex in the acp_keys file. If there is no match, the Remote
Annex and the server cannot communicate.
To create an entry in the acp_keys file:
1. Open the acp_keys file from the Bay Networks program
group window by double-clicking on the appropriate icon.
The acp_keys file opens in the Notepad editor.
2. Go to the area of the file where entry information resides
and enter one or more Remote Annex names or IP
addresses.
You can use an asterisk (wildcard) for any part of an IP
address. If you list more than one Remote Annex, you must
separate names or IP addresses using commas.
3. Type a colon to separate Remote Annex names or addresses
from the encryption key.
4. Enter an encryption key that uses up to 15 characters.
You cannot use spaces or tabs here. Encryption keys are
case-sensitive. For additional information, refer to
Encryption Keys on page 3-17.
®
User Guide
Creating