Bay Networks Remote Annex User Manual page 37

time Keyword
protocol Keyword
annex and ports
Keywords
The time keyword allows you to define a period of time during which a
profile's attributes apply.
To use this keyword, type
following:
• A day of the week (e.g.,
• A specific date, including the month and the date
(e.g.,
August 1
• A range of hours in hh:mm format (e.g.,
must enter a start time and an end time. You can enter
. or
a.m p.m.
If you do not enter a day and/or a date, erpcd applies the start and
end time every day of the week. If you omit
specifying time in the 24-hour format.
The protocol keyword defines a protocol by which a user can connect to
a Remote Annex.
To define a protocol, type
You cannot enter more than one protocol on a line. However, you
can repeat the
protocol=
The annex and ports keywords specify the Remote Annexes and ports
to which profile attributes will apply.
To list Remote Annexes and/or ports, type
followed by one or more Remote Annex names or IP addresses and
one or more port numbers, respectively.
You can use an asterisk to specify a partial Remote Annex name or
IP address. In addition, you can enter individual port numbers
separated by commas or a range of port numbers using dashes (e.g.,
).
ports=1,3,6-22
Remote Annex Server Tools for Windows NT
Chapter 3
followed by one or more of the
time=
).
Tuesday
).
following each time.
followed by
protocol=
format and add a second or third profile.
annex=
®
User Guide
Understanding Erpcd
). You
06:30
or , you are
a.m. p.m.
, , or .
slip ppp cli
and/or
ports=
3-5