Backup Security - Bay Networks Remote Annex User Manual

Chapter 4 Using Security Features

Backup Security

4-20
Remote Annex Server Tools for Windows NT
When or If...
the maximum number of retries
(10 by default) is reached without
a response from the server,
no response is received from the
backup server,
an accounting fail-over occurs, the
server remains the same until,
both the accounting primary
server and backup fail,
If you configure port server, CLI, VCLI, and PPP security to use Windows
®
NT domain names and passwords and the ACP security server is not
available, the Remote Annex can use its locally-stored password
parameters to restrict user access. These parameters settings serve as
backup security.To use backup security, you must set the parameters listed
in the following table.
For: Back-up Security uses:
Port Server port_password
Incoming Port port_password
VCLI vcli_password
For additional information about back-up security and settings for
these parameters, please refer to the Remote Annex Administrator's
Guide for UNIX.
The...
attempt to authenticate against the
primary server fails and ERPCD/ACP
attempts to authenticate against the
backup server (if defined).
user is rejected.
failure of the backup server.
the acp_logfile records RADIUS
accounting.
®
User Guide