Bay Networks Remote Annex User Manual page 41

deny
filter
When a user's name and password match the profile, erpcd sends this list
to the Remote Annex, which prevents the user from executing the
commands.
You cannot use climask unless you set the cli_security parameter to
. You should not include the same CLI command in the clicmd and
Y
climask entries.
For detailed information about all CLI commands, please refer to the
Remote Annex Administrator's Guide for UNIX
The deny attribute prevents a user from connecting to a Remote Annex.
To use the command:
1. Open the acp_userinfo file from the Bay Networks program
group window by double-clicking on the appropriate icon.
The acp_userinfo file opens in the Notepad editor.
2. Go to the area of the file where entry information resides
and type
deny
If you include additional attributes in a profile that uses deny, the
profile will not execute additional attributes.
When erpcd denies access to a Remote Annex, it generates a message in
the log file. For CLI users, the message appears on the screen.
The filter attribute sets network address restrictions for specific users or
groups. These restrictions apply to the port on which a user logs in.
To use the attribute:
1. Open the acp_userinfo file from the Bay Networks program
group window by double-clicking on the appropriate icon.
The acp_userinfo file opens in the Notepad editor.
Remote Annex Server Tools for Windows NT
Chapter 3
.
following a user name or group name.
®
User Guide
Understanding Erpcd
3-9