Table B-10. Field Definitions For The Netstat -F Command; Memory Statistics - Nortel 2000 User Manual

Chapter 1 Network Administration
Remote Annex Administrator's Guide for UNIX
Book B-20
Table B-10. Field Definitions for the netstat –f Command
Field Definition
Int Displays the interface.
In-hits Displays the number of packets that matched an input filter.
Out-hits Displays the number of packets that matched an output filter.
Drop Displays the number of discarded filtered packets.
ICMP Displays the number of filtered packets that sent an ICMP
message.
Syslog Displays the number of filtered packets that were syslogged.

Memory Statistics

The netstat –m command displays statistics for the memory management
routines:
annex01# netstat –m
1127/3599 mbufs in use:
7 mbufs allocated to data
2 mbufs allocated to packet headers
9 mbufs allocated to socket structures
14 mbufs allocated to protocol control blocks
3 mbufs allocated to routing table entries
2 mbufs allocated to socket name
2 mbufs allocated to interface address
64 mbufs allocated to incoming network i/f packets
1024 mbufs allocated to SPD Layer RX Data/Status
899 Kbytes allocated to network (31% in use)
0 requests for memory denied
Book B