Nortel 2000 User Manual page 85

using to test network B-23
PPP
SLIP port parameters vs. MIB objects and B-
74
statistics B-6 to B-8
protocol statistics B-21
R
reset annex nameserver command
using for host table management B-36
RIP
statistics B-11
rotaries
statistics from netstat B-18
route
cache
information B-17
dial-out
information B-18
routing
table
statistics and information B-13 to B-16
RWHO protocol B-34
S
security
host-based
logging B-26
serial line
monitoring activity B-33
Simple Network Management Protocol. See
SNMP
SLIP
PPP port parameters vs. MIB objects and B-
74
statistics B-9
SNMP B-41 to B-74
Annex parameters vs. Annex private enter-
prise MIB B-58 to B-74
configuration parameters vs. MIB
objects B-59 to B-61
LAT statistic objects B-63
PPP and SLIP port parameters vs. MIB
Annex restrictions on standard MIBs B-51 to
B-59
commands B-46
get B-46
get-next B-46
set B-46
using to send commands to
configuring Annex for B-43 to B-46
SNMP agent configuration B-43
defining allow_snmp_sets
defining community string B-44
defining contact string B-45
defining disabled_modules
defining location string B-46
defining trap hosts and traps B-44
describing and naming objects B-50
gateway entry for community string B-44
gateways file entry for trap hosts B-45
message delivery B-42
MIB object hierarchy B-50
MIBs supported by Annex B-49 to B-57
AppleTalk MIB, and restrictions B-53
Character MIB, and object
Ethernet MIB, and object restrictions B-
MIB-II, and object restrictions B-52
RIPv2 MIB, and object restrictions B-54
RS-232 MIB, and object restrictions B-
overview B-41
setting port speed B-57
supported traps B-45
statistics
filtering B-19
Remote Annex Administrator's Guide for UNIX
objects B-74
Annex B-47
parameter B-46
parameter B-46
restrictions B-55
54
56
Index-3