Interface Statistics - Nortel 2000 User Manual

Book B
The netstat –a command display looks like this:
annex01# netstat –a
Active connections (including servers)
Proto Recv-Q Send-Q Local Address Foreign
tcp 0 2
tcp 0 0
tcp 0 0
tcp 0 0
tcp 0 0
tcp 211 0
tcp 0 0
tcp 0 0
tcp 0 0
tcp 0 0
udp 0 0
udp 0 0
udp 0 0
udp 0 0
udp 0 0

Interface Statistics

The netstat –i command displays interface statistics for an Annex
running on an Ethernet LAN. Table B-2 describes the hardware interface
statistics for Ethernet.
Remote Annex Administrator's Guide for UNIX
Chapter 1
Address
annex1.telnet test1.4759
annex1.883 gibbs.login ESTABLISHED
annex1.1085 ale.telnet
annex1.1081 opus.telnet ESTABLISHED
annex1.1022 test1.login ESTABLISHED
annex1.953 xzyx.login
annex1.1021 test1.login ESTABLISHED
*.finger *.*
*.printer *.*
*.telnet *.*
*.bootp *.*
*.snmp *.*
*.who *.*
*.erpc *.*
*.route *.*
Network Administration
(state)
ESTABLISHED
ESTABLISHED
ESTABLISHED
ESTABLISHED
ESTABLISHED
LISTEN
Book B-3