Nortel 2000 User Manual page 26

Chapter 1 Network Administration
Remote Annex Administrator's Guide for UNIX
Book B-18
Dial-out Route Information
The netstat –r command displays statistics and information about all
available routes in the routing table, including dial-out routes. If the
dial-out route currently is not active, only do<route number> appears in
the Interface field. If the route has been assigned to a port, either slip
<port number> or ppp <port number> appears in the Interface field.
Table B-7 on page A-15 describes the field definitions for the netstat –r
command display.
The netstat –i command displays the dial-out route's interface name. A
truncated view of the command display looks like this:
annex01# netstat –
Name Mtu Network
en0 1500 132.245.33 132.245.33.50 16
lo0 1536 127
do1 1500 1
Rotary Information
The netstat –R command displays all rotaries configured for the Annex.
Table B-9 describes the field definitions for the command display. The
netstat –R command display looks like this:
annex01# netstat –R
Rotary nameAddress
oemandy1 *.telnet
conan_33 *.telnet
borneo1 192.9.200.250.telnet telnet ask
brazil7 192.9.200.253.6003
annex3 *.6103
i
Address Ipkts Ierrs Opkts OerrsCollis
127.0.0.1 0
132.245.33.90 4
Proto
telnet ask
telnet ask
telnet ask
telnet ask
0 16 0 0
0 0 0 0
0 4 0 0
Camp Flags Annex ports
11
16
1
7
8,13,15
Book B