Table of Contents
Advertisement
68 Chapter 5 Flash file system
Flash file system commands
You can use the cd, dir, and pwd commands in the flash file system. For details
on the commands, see "Flash file system commands" (page 68).
Table 11
Flash file system commands
Command
cd <directory path>
dir
pwd
Loading a different software version
Use the bootpath command to load different software versions that are stored
in either C:\LOAD_A directory or C:\LOAD_B directory. The syntax of the
command is:
where
[set]
Procedure
1
2
3
4
241-5101-201 R2.2
Definition
Changes the current directory to another
directory.
Lists the contents of the current directory.
Note: The date and time are fixed.
Displays the current directory.
bootpath [set]
changes the software version
Note: Entering the bootpath command without the [set] parameter
displays the current LOAD directory being used.
Check the current directory the Passport 8250 device uses to load files:
bootpath
Change the directory:
bootpath [set]
Enter the new directory.
Restart the Passport 8250 device and load files from flash memory:
reboot
Advertisement
Table of Contents
