•
view faults in the fault log
•
modify the boot parameters
•
configure a VPI/VCI for IP over ATM (IPOA)
•
load different versions of the system software and configuration data
NMS Passport 8250 Tools
The activities you can perform in the NMS Passport 8250 Tools depends on
the release number.
You can perform the following activities in the NMS Passport 8250 Tools
release 11.1:
•
create unstructured and structured connections using default values or
customized values
•
view connections
•
delete connections
— structured connections can be deleted individually
•
use default port configuration settings or customized values
•
view the status of the boards and ports
•
view ATM CES and DSX1 statistics
You can perform the following activities in the NMS Passport 8250 Tools
release 11.2:
•
create unstructured and structured connections using default values or
customized values
•
view connections
•
delete connections
— structured connections can be deleted individually
•
use default port configuration settings or customized values
•
configure the redundant ATM uplink port
•
set the reference clock
•
view the status of the boards
Passport 8250 Command Line Interface Guide R2.2
Chapter 1 Introducing the Passport 8250 19