30 Chapter 2 Getting started with the CLI
•
•
For example
where
bootconfig
[set]
For details on the conventions used in this document, see "Conventions"
(page 12).
Abbreviations
The CLI command recognizes partial commands and parameters. Type only
as many characters as is necessary to uniquely identify the command or
parameter. For example, type clock for the clockconfig command.
Uppercase and lowercase
In general, the CLI does not distinguish between uppercase and lowercase
characters for commands, but does for values that are strings. Therefore, type
values that are string exactly as written in this document. For example, type
NONE or BITORIENTED for the signal mode parameter in the portconfig
241-5101-201 R2.2
Mandatory parameter is information that is required to complete the
command.
Optional parameter is information that is required to perform a specific
action or information that is not required to complete the command.
— An optional parameter is identified by square brackets.
bootconfig [set]
is the command to configure the boot parameters.
is an optional parameter to modify the boot parameters.