Nortel Passport 8250 Command Line Interface Manual page 67

Table 10
Files
File Description
APPL.O Executable service board file.
BOOT.CFG Identifies which BOOT.O file to load into the network
board.
BOOT.O Executable network board file.
CESE1.DAT Contains E1 circuit emulation connection information.
CEST1.DAT Contains DS-1 circuit emulation connection information.
REFCLOCK.DAT Contains clock management configuration information.
DSX1T1.DAT Contains DS-1 port configuration information.
DSX1E1.DAT Contains E1 port configuration information.
FLTLOG.DAT Contains faults.
HWINIT.O Initializes service board hardware.
INBAND.DAT Contains ATM in-band management configuration
information.
LOADER.O Executable file used to load APPL.O
SNMPMGRS.DAT Contains list of SNMP trap destinations.
SYSINFO.DAT Contains system information in system group of MIB II.
UPLINK.DAT Contains redundant ATM uplink configuration
information.
Passport 8250 Command Line Interface Guide R2.2
Chapter 5 Flash file system 67