Enabling Call Forward (Wifi Only) - Nortel MCC3100 User Manual

MCC 3100 for Windows Mobile functionality

Enabling Call Forward (WiFi only)

When you enable Call Forward (CFW), all incoming WiFi calls forward to
the number your administrator specifies in the configuration settings.
1. On the navigation bar, tap the Home icon.
The Home screen appears.
2. Tap the check box beside the CFW icon to enable Call
Forward.
You can tap the CFW check box to switch between CFW enabled and
disabled.
For information about configuring CFW, see
setup" on page
If your administrator enables the Play ring reminder when forward setting
your mobile device rings briefly each time a call
To test Call Forward, direct your calls to another phone number, for
example, your home number. Dial your enterprise phone number to
ensure the call redirects to your home number. If the call does not forward
to your home number, contact your administrator.
Call Forward is for WiFi calls only. To enable call
forward for cellular calls, configure the Global System
for Mobile Communications (GSM) and Code Division
Multiple Access (CDMA) settings provided by your
wireless service provider.
CS 1000 operating parameters
On the MCC 3100 for Windows Mobile, CFW does not prevent the cellular
interface from extending the cellular leg of the call if CS 1000 is
configured to present each call on both the cellular and WiFi interfaces.
On the MCC 3100 for Windows Mobile for WiFi, Call Forward does not
prevent any other phones with the same Directory Number (DN) from
ringing. If you enable Call Forward for all phones on the DN then you
must set Call Forward on a desktop phone.
54
97.
IMPORTANT!
Appendix A "Manual
forwards.