Returning To The Mcc 3100 For Windows Mobile - Nortel MCC3100 User Manual

Basic setup and use
Select Tools > Basic Dialpad.
The MCC 3100 for Windows Mobile application stops and the view
switches to the native Windows Mobile dialer. See
Figure 24:
Windows Mobile dialer
You can use the native dialer to place calls on the cellular network.

Returning to the MCC 3100 for Windows Mobile

If the native dialer is currently open on the mobile device, close it, then
use the following procedure to return to the MCC 3100 for Windows
Mobile.
1. From the native dialer, press and hold the MCC 3100 button.
The MCC 3100 button displays.
2. Press the MCC 3100 button.
The native Windows Mobile dialer stops and the view switches to the
MCC 3100 for Windows Mobile application.
46
Figure 24 on page 46.