Basic Setup And Use; Starting Mcc 3100 For Windows Mobile - Nortel MCC3100 User Manual

Basic setup and use

This section describes how to configure, start, and use the Nortel Mobile
Communication Client (MCC) 3100 for Windows Mobile basic features.
Use the following procedures:
• "Starting MCC 3100 for Windows Mobile" on page 33
• "How to enter your configuration settings" on page 35
• "Power management enhancements for Voice over WLAN" on
page 36
• "Configuring a display name" on page 38
• "Network roaming mode selection" on page 39
• "Screen lock" on page 40
• "Setting the call alert mode and phone volume" on page 41
• "Screen access" on page 43
• "Screen views" on page 43
• "Basic dialpad" on page 45
• "Exiting the MCC 3100 for Windows Mobile" on page 47

Starting MCC 3100 for Windows Mobile

Select the Nortel MCC 3100 icon
MCC 3100 for Windows Mobile.
Before you start the MCC 3100 for Windows Mobile, install the license
key on the mobile device. For more information, see
key" on page 24.
1. Tap Start > Programs.
2. Tap the Nortel MCC3100 icon.
3. Tap Yes to allow the application to run.
The MCC 3100 splash screen appears momentarily. See
on page 34.
Basic setup and use
on the Programs screen to start the
"Installing the license
Figure 18
33