Appendix A: Manual setup
Enter your settings directly in the Nortel Mobile Communication Client
(MCC) 3100 for Windows Mobile interface.
Before you begin, complete the following procedures:
•
"Installing the MCC 3100 for Windows Mobile software" on
page 17
•
"Installing the license key" on page 24
The system administrator enters the manual configuration settings. If you
enter incorrect values, the MCC 3100 for Windows Mobile can disconnect
from the call control server. The following settings are available:
•
•
•
•
•
•
•
Line settings
Use this procedure to configure Line 1 on the MCC 3100 for Windows
Mobile.
1. On your mobile device, select Start > Programs.
The Programs screen appears.
2. Tap the Nortel MCC3100 icon.
The Home screen appears.
3. Select Tools > Settings.
The MCC 3100 for Windows Mobile screen appears.
4. Tap the Line 1 tab located at the bottom section of the screen.
The Line 1 panel appears.
Manual setup
97