Figure 42: Compose screen
3. If necessary, select the appropriate option to change networks:
•
Cell for SMS messaging.
•
WiFi for Instant Messaging (MCS 5100 only).
You can switch networks only if the MCC 3100 for Windows Mobile is
set to operate in manual roaming mode. For more information, see
"Network roaming mode selection" on page
4. Enter a mobile phone number or SIP username in the To: field.
5. Type your message in the SMS box. Limit the message to 160
characters, maximum; some networks require shorter messages than
160 characters.
6. Press the Send key.
The Sent folder stores a copy of the message. You receive a delivery
notification message (indicating success or failure) if your
administrator enables SMS Notification in the configuration settings.
If you send a message on the WIFi network, you must enter a valid SIP
user name for a user in your domain.
MCC 3100 for Windows Mobile functionality
39.
79