Uninstalling the MCC 3100 for Windows
Mobile software from your PC
This procedure describes how to remove the MCC 3100 for Windows
Mobile software from your PC.
Before you uninstall the MCC 3100 for Windows Mobile software, ensure
you install that Microsoft ActiveSync and connect the mobile device and
the PC with a Universal Serial Bus (USB) cable.
1. On your PC, select Start > Settings > Control Panel > Add or
Remove Programs.
2. Select Nortel Mobile Communication Client 3100.
3. Select Change/Remove.
Follow the prompts to remove the MCC 3100 for Windows Mobile
software from your PC.
Determining the software version
To check the software version of the MCC 3100 for Windows Mobile from
the About screen, select Tools > About.
Software installation
31