Selecting A Network While In Manual Roaming Mode - Nortel MCC3100 User Manual

MCC 3100 for Windows Mobile functionality
• "Muting the microphone" on page 69
• "Switching between the earpiece and speaker phone" on page 70
• "Placing a call on hold" on page 70
• "Transferring a call (WiFi only)" on page 71
• "Setting up a conference call (WiFi only)" on page 71
Selecting a network while in manual roaming
mode
Use the following procedure to specify which network, either WiFi or
Cellular, that you want to use as your dialout network. Use this network to
place all of your outgoing calls.
Before you can switch between the WiFi and cellular networks, you must
configure the MCC 3100 for Windows Mobile to operate in manual
roaming mode and you must be logged in to both networks. For more
information, see the following sections:
• "Selecting a roaming mode" on page 39
• "Logging on a network manually" on page 55
1. On the navigation bar, tap the Call Dialpad icon.
The Call dialpad screen appears.
2. Tap the WiFi or Cell button.
The MCC 3100 for Windows Mobile attempts to log on to your network.
The button lamp indicates your status. See
58
Table 3 on page 40.