Dialing Plan Settings - Nortel MCC3100 User Manual

Table 14: Advance configuration fields (Part 5 of 5)
Enable WiFi Standby
Turn Off if WiFi
Unregistered for
4. Tap Apply to accept your changes or Undo to start again.

Dialing Plan settings

Use the following procedure to configure Dialing Plan settings on the
MCC 3100 for Windows Mobile.
1. From any screen, select Tools > Settings.
The MCC 3100 for Windows Mobile screen appears.
2. Tap the Dialing Plan tab.
The Dialing Plan panel appears.
If you select this check box, the mobile device
enters standby mode whenever it is switches
off (for example, you press the Power button
or the activity timer expires). In standby mode,
the device backlight, touch and audio are off,
and the range of the WiFi radio reduces, but
the system remains active and the MCC 3100
for Windows Mobile can continue to receive
calls and messages.
If you clear this check box, the mobile device
power downs when it is switches off and the
MCC 3100 for Windows Mobile cannot receive
calls and messages.
If you select "Enable WiFi Standby", you can
specify a timeout period of 1 to 120 minutes.
This causes the mobile device to turn off when
it is in standby mode and when you unregister
from the WiFi network for longer than the
period of time you specify.
If you clear this check box the device power
status is unaffected by the WiFi network
connection.
Manual setup
107