Req New Cust; Configuring The Nrs Database; Nn43001-307 02.02 Standard - Nortel 1000 Configuration Manual

Configuring the dialing plan for PSTN access to SRG users in Normal Mode 57
After configuring main office routing to the NRS, the NRS database must
be provisioned to identify the desired endpoint for the calls. This procedure
configures the NRS database with the inserted digits specified by the
zone-based digit manipulation configuration.
Instead of configuring the NRS database, you can configure a route in the
main office to directly route the call (see step 4).
This procedure provides information specific to the configuration of the
NRS database for this application. See IP Peer Networking Installation and
Commissioning (NN43001-313) for complete details on configuring the NRS.
Procedure 4
Configuring the NRS database
Step
1
2
3
Copyright © 2005-2007, Nortel Networks
.
>LD 90
REQ NEW
CUST 0
FEAT NET
TRAN AC1
TYPE SPN
SPN 1011
11 digits for long-distance + 3 digits for ZDP
FLEN 14
...
RLI 10
CLTP NATL
...
SPN 1015
7 digits for long-distance + 3 digits for ZDP
FLEN 10
...
RLI 30
CLTP LOCL
...
SPN 1016
7 digits for long-distance + 3 digits for ZDP
FLEN 10
RLI 30
CLTP LOCL
...
Action
Click the Configuration tab in NRS.
Click set Standby DB view to work in the standby (inactive)
database.
Select Routing entries from the navigation menu on the left-hand
side of the Network Routing Service window.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50

NN43001-307 02.02 Standard

Release 5.0 3 December 2007