Nortel 1000 Configuration Manual page 36

36 Setting up the main office
Command Description
Define a zone as a branch office zone.
CHG ZDST <Zone> <yes|no> <StartMonth> <StartWeek> <StartDay> <StartHour> <EndMonth>
<EndWeek> <EndDay> <EndHour>
If the branch office observes Daylight Savings Time (DST), these parameters
specify the start and end of DST. During DST, the clock automatically advances
one hour forward.
CHG ZTDF <Zone> <TimeDifferencefromMainOffice>
Specified in minutes, the time difference between main office and branch office
when both are not in DST.
CHG ZDES <Zone> <ZoneDescription
A name to render data display more meaningful.
4
LD 117 Enable features for an SRG zone
Command
ENL ZBR <zone> ALL
Configuring zone parameters using CS 1000 Element Manager
Use Element Manager to configure the branch office specific zone
properties and time difference.
1. Select IP Network > Zones in Element Manager navigator.
Copyright © 2005-2007, Nortel Networks
.
Enable the features for the branch office zone in LD 11.
Description
Enables features for branch office <zone>.
The Zones window opens. See
36). The zone list is the main window used for zone configuration.
Figure 2
Zone List web page
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
—End—
Figure 2 "Zone List web page" (page