Displaying Cac Parameters For One Or More Zones; Nn43001-307 02.02 Standard - Nortel 1000 Configuration Manual

124 Bandwidth Management
Maintenance using Element Manager
The CAC parameters, intrazone statistics, and interzone statistics for one
of more zones are available in Element Manager from the Zones web
page, shown in
or interzone statistics, use
statistics for a zone" (page
steps in
(page
Procedure 8

Displaying CAC parameters for one or more zones

Step
1
2
3
4
5
Copyright © 2005-2007, Nortel Networks
.
Figure 30 "Zones web" (page
Procedure 7 "Printing intrazone and interzone
Procedure 8 "Displaying CAC parameters for one or more zones"
124).
Action
Select IP Network > Zones from the navigator.
The Zones web page opens (see
105)).
Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page appears,
as shown in Figure 31 "Maintenance Commands for Zones web
page" (page 107). This page lists all the configured zones and their
intrazone statistics by default.
Select Print Adaptive Network Bandwidth Management and CAC
Parameters (PRT ZCAC) from the Action drop-down list.
Select a zone from the Zone Number drop-down list, by doing one
of the following:
• Select ALL to print statistics for all zones.
• Select a specific zone number to display statistics for a specific
zone.
Click Submit.
The Maintenance Commands for Zones web page reopens,
displaying the statistics for the specified zone or zones. A blank
field indicates that statistic is either not available or not applicable to
that zone.
Figure 39 "Element Manager CAC parameters" (page 125)
an example of the CAC parameters.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50

NN43001-307 02.02 Standard

Release 5.0 3 December 2007
105). To view the intrazone
106). To display the CAC parameters, follow the
Figure 30 "Zones web" (page
shows