Nortel 1000 Configuration Manual page 53

Configuring the dialing plan for PSTN access to SRG users in Normal Mode 53
Prompt Response
CUST xx
FEAT DGT
DMI 1-999
DEL (0)-19
INST x...x
ISPN
(YES)
NO
CTYP
SPN
LOC
LD 86 Configure Route List Index.
Prompt Response
REQ NEW
CUST xx
FEAT RLB
RLI
0-127
0-255
0-999
0-63
ENTR
X
LTER NO
ROUT
Copyright © 2005-2007, Nortel Networks
.
Description
Customer number as defined in LD 15.
Digit manipulation data block
Digit Manipulation Index numbers
The maximum number of Digit Manipulation tables is defined at
the MXDM prompt in LD 86.
Number of leading digits to be deleted, usually 0 at the main
office.
Insert. Up to 31 leading digits can be inserted, usually none at
the main office. Default is none.
IP Special Number
For off-net calls
For on-net calls
Call type to be used by the call. This call type must be
recognized by the NRS and far-end switch. This is critical for
correct CLID behavior.
If ISPN=NO, the CLID is based on this field. If ISPN=YES, the
CLID is based on the call type before digit manipulation.
For off-net calls (ISPN=YES)
For on-net calls (ISPN=NO)
b. Configure the RLI in LD 86 with the RLB feature.
Description
Add new data.
Customer number as defined in LD 15.
Route List data block
Route List Index to be accessed
CDP and BARS
NARS
FNP
Entry number for NARS/BARS Route List
Precede with x to remove
Local Termination entry
Route number of the Virtual Trunk as provisioned in LD 16.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007