Nortel 1000 Configuration Manual page 103

Select the zone on the Zones web page (see
105)) and click VGW and IP phone codec profile. Select an existing
codec or configure a new one in the VGW and IP phone codec profile
section, shown in
Peer Networking Installation and Commissioning (NN43001-313) for full
instructions on configuring a codec.
Figure 29
Configuring a codec
Configuring Bandwidth Management
The steps to configure Bandwidth Management on the Call Server are as
follows:
Step
1
2
Copyright © 2005-2007, Nortel Networks
.
Configuring Bandwidth Management parameters 103
Figure 29 "Configuring a codec" (page
Action
Define a VPNI number in LD 15.
Configure the Bandwidth Management parameters for each zone on
the Call Server using either Element Manager (see
using CS 1000 Element Manager" (page
"Configuration using LD 117" (page
• Call Server zones that will be used for endpoints (telephones
and gateways) with the following properties:
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Figure 30 "Zones web" (page
103). See IP
"Configuration
104)) or LD 117 (see
105)).