Nortel 1000 Configuration Manual page 141

Figure 51
Call to remote branch office on destination side
1. Main office B determines that this LOC plus digits is to a local branch
2. The main office sends the call to 225-444-3456 to the branch office. The
No branch office HLOC is shared with the main office or another branch
office
The following example shows a call between two branch offices. In this
example, the HLOC is unique between the main office and branch office.
Figure 52 "Call to remote branch office on the originator side" (page
142)shows the first half of the call (originator side of the call). In
"Call to remote branch office on destination side" (page 143)
second half of the call (destination side of the call).
Copyright © 2005-2007, Nortel Networks
.
office with prefix 225. (If sharing this LOC with another branch office,
the extended LOC is 44434.) The system transmits 225-444-3456 to
the NRS. The NRS checks its provisioning, and determines that this call
goes to branch office B1.
branch office deletes the prefix, and the HLOC, and rings set 3456.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Network using Uniform Dialing Plan 141
Figure 53
shows the