Nortel 1000 Configuration Manual page 197

Table 20
LD 20 Generate a CLIDVER report
Prompt
REQ:
TYPE
SORTBY
ESA_ONLY
SHORT
TN
CUST
DN
DATE
PAGE
DES
Copyright © 2005-2007, Nortel Networks
.
provides CLID Verification (CLIDVER) reports that determine how an
emergency call is routed, without actually routing the call. Use LD
20 to generate a CLIDVER report.
Response
PRT
CLIDVER
(DN) TN
(YES) NO
(YES) NO
lscu
xx
x...x
dd mmm yyy
(NO) YES
d...d
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Emergency Services Access 197
Description
Print
CLID Verification
The output/report is sorted
based on this flag.
If the response is DN, the
overlay prompts the user to
enter the DN, and the output
is sorted by the DN. If the
response is TN, the overlay
prompts the user to enter the
TN and the output is sorted by
the TN.
Flag used to decide if the report
should contain information for
ESA call type only or for all call
types.
If the ESA package is restricted,
this input prompt does not
appear. The report contains
non-ESA data only.
Flag used to decide if the output
report should be a Short report
of a Detail report.
Terminal Number
Format for Large System,
where l = loop, s = shelf, c =
card, and u = unit
Customer number as defined in
LD 15.
Directory Number. If no value is
entered, the report includes all
supported Directory Numbers.
Date
Data printed on a per page
basis.
Designator