Nortel 1000 Configuration Manual page 143

Figure 53
Call to remote branch office on destination side
1. Main office B determines that LOC 444 is to a local branch office with
2. The main office sends the call to 225-444-3456 to the branch office.
Summary of provisioning procedures for Tandem Bandwidth
Management
Use
145)
Step
1
2
3
Copyright © 2005-2007, Nortel Networks
.
prefix 225. The system transmits 225-444-3456 to the NRS. The NRS
checks its provisioning, and determines that this call goes to branch
office B1.
The branch office deletes the prefix, discovers the call is to its HLOC,
deletes the HLOC, and rings set 3456.
Procedure 9 "Provisioning Tandem Bandwidth Management" (page
to provision the network.
Action
Enter the main office Gateway endpoint identifier in the Tandem
Endpoint field for each branch office gateway configured on the
NRS. This provides tandeming for outbound calls from a branch
office through its main office. See Step 1.
Plan the gateway routing prefixes, if not already done. At least one
prefix is needed per branch office, although any branch offices that
have a prefix for ESA 911 calls does not necessarily require another.
(These prefixes will be SPN - Special Number - entries.) See Step 2.
Provision the NRS to send all calls to a LOC without a gateway
routing prefix to the main office of that LOC, or to the main office
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Network using Uniform Dialing Plan 143