Nortel Meridian Meridian 1 Installation Manual page 44

Page 44 of 60 Configuring the software
Table 1
MSDECT.properties file (Part 3 of 3)
Property
dect.messagestatus.timelimit
dect.snpp.statuscheck
TAP
dect.tap.modem
dect.tap.portid
dect.tap.bps
dect.tap.databits
dect.tap.stopbits
dect.tap.parity
P0989045 Standard 1.0 May 2002
Descriptions
Defines how old the status of
a message is before it is
deleted.
How often the Message
Status table gets checked for
data which is too old
Indicates whether the system
is connected to a modem.
Port on which modem is
connected to.
Baud Rate for modem
Modem settings
Modem settings
Modem settings
Possible values
Defined the same as retry
profiles. See "Retry
Properties" on page 45.
Defined the same as retry
profiles. See "Retry
Properties" on page 45.
If set to true, consult
"Recommended modem
settings" on page 50. The
values defined there must
match the properties below in
order for the TAP interface to
work correctly. Default is
false.
Valid serial port name on
system. Default is COM1.
110, 300, 1200, 2400, 4800,
9600, 19200, 38400, 57600,
115200. Default is 9600.
Default is 8.
Default is 1.
Default is "none".