Tap Protocol; Snpp Protocol - Nortel Meridian Meridian 1 Installation Manual

Page 38 of 60 Using the DECT Messaging system

TAP protocol

SNPP protocol

P0989045 Standard 1.0 May 2002
A TAP message with normal priority, sent to a either a group or individual
user, does not receive an acknowledgement from the MS.
An SNPP message to a single destination, normal priority, receives an
ACK message delivery from the MS.
An SNPP message to a single destination, urgent priority, receives an
ACK user acceptance from the MS.
An SNPP message to a defined user group, normal priority, receives an
ACK message receipt from the MS.
An SNPP message to a group of destinations or a defined user group, urgent
priority, receives an ACK user acceptance from the MS, either when the first
user, or the entire group, acknowledges the message. This setting is
configured by the administrator on the Messaging Server.
CAUTION
Use caution when configuring ACK user
acceptance required from all members of the group.
If one user does not acknowledge the message, then
the sender receives no acknowledgements from
anyone in the group.
Groups
If the user enters an invalid number among a number of correct ones, it may
or may not be counted as a failure, depending on how the system is
configured.