Nortel Meridian Meridian 1 Installation Manual page 46

Page 46 of 60 Configuring the software
Table 3
Retry.properties
Property
1 – 9
0
P0989045 Standard 1.0 May 2002
The error which the network
or handset returns when the
system fails to deliver a
message to it. See Table 4.
The value number to the right
of the "=" sign defines how
many times the message is
retried. The numbers
themselves define after what
time the message is retried.
Default value if the error sent
back is not recognized.
Failure codes
If messages are not successfully sent, a failure code is returned. Table 4 lists
the failure codes and their definitions.
Table 4
Failure codes (Part 1 of 2)
Failure code
1
2
3
4
5
6
Description
Congestion. The DECT system is busy.
Handset is out of range or turned off.
Handset is not subscribed to the DECT system.
DECT system is not in service.
DECT card is not in service.
Dropped call – abnormal release.
Possible Values
The values are defined either
in seconds (s) minutes (m) or
hours (h).For example 10s -
message is retried after 10
seconds,1m - message is
retried after 1 minute,2h -
message is retried after 2
hours. A retry value of 1s to
2s is recommended.
This can be configured to any
time period as defined above.
The default value is that the
message is immediately
discarded
Definition