Message Handling; Acknowledgement Message Description - Nortel Meridian Meridian 1 Installation Manual

Message handling

Acknowledgement message description

6 To send a message to more than one handset, select a pre-defined
group as the target, or select more than one handset.
7 If groups are implemented on the system, a specified group can
receive a message. Groups are administered from the Messaging
Server administrator screens.
Groups are treated as normal targets by external applications.
However, external applications cannot change the name of a group or
members of a group that they are targeting.
—————————— End of Procedure ——————————
Queries that return a large number of responses are split into several screens.
This maximizes the performance of the system, and makes the lists more
manageable. Next page and Previous page on the display screen provide a
link to the next page of responses.
The following section defines message acknowledgements, and explains how
messages are handled for each protocol.
ACK receipt – a message was successfully received at the Messaging server.
ACK message delivery – a message was successfully received at the
handset.
ACK user acceptance – a message was read by the user and acknowledged.
All message attempts are recorded on the Message Server (MS) activity log.
This information includes basic details about all calls sent and received on the
messaging system.
Failure codes
If messages are not successfully sent, a failure code is returned. For more
information on Failure codes, see "Failure codes" on page 46.
Using the DECT Messaging system Page 37 of 60
DECT Messaging Installation Guide