Uninstalling The Dect Messaging System - Nortel Meridian Meridian 1 Installation Manual

Uninstalling the DECT Messaging system

To uninstall the DECT Messaging system, follow the steps in Procedure 3.
Procedure 3
Uninstall the DECT Messaging system
1 From the PC's Start button, select Control Panel. Select DECT
Messaging from the Add/Remove dialog in the Control Panel, then
click Add/Remove. Alternatively, insert the installation CD and run the
setup program.
The Confirm File Deletion dialog appears. See Figure 5.
Figure 5
Confirm File Deletion dialog
2 Click OK to remove the DECT Messaging application.
Note: If OK is clicked, only the DECT Messaging software is
removed. The Java development kits or Java directories are not
removed.nbn
The Setup Type dialog appears. See Figure 6 on page 22.
3 The Setup Type dialog box provides the option of keeping or removing
the subscription information:
a. Select Remove Subscriptions to clear all handset entries. The
handset entries will have to be re-entered the next time DECT
Messaging is installed on the PC.
Installing the DECT Messaging software Page 21 of 60
DECT Messaging Installation Guide