Nortel Meridian Meridian 1 Installation Manual page 43

Table 1
MSDECT.properties file (Part 2 of 3)
Property
dect.messageLengthCheck
sock.monitor
sock.period
auth.timer
pool.inc
SNNP
dect.snpp.port
dect.snpp.help
dect.snpp.notification
dect.snpp.sockettimeout
Descriptions
Each handset has an
associated handset type,
which can only accept a
maximum number of
characters. This is the lowest
value of the number on the
system.
Whether the system should
monitor the connection to the
Meridian/Succession system.
How often the connection to
the system is checked.
How often the authentication
is checked with the system.
If the system is using more
than 100 message objects,
this parameter indicates how
many more are created.
Port on which SNPP telnet
connections are accepted by
DMS.
File which lists the text
printed out when a client
SNPP connections enters a
"help" command
Whether the system sends a
"Message delivered"
message to the client when
the all or the first member(s)
respond to an urgent
message.
How long the each SNPP
connection stays open when
there has been no activity.
Configuring the software Page 43 of 60
Possible values
Default is 48.
Default is false.
Default is 200 (10ths of
seconds).
Default is 840000
milliseconds.
Default is 10.
Any number > 0. Default is
1080.
Default is
SNPPHelp.properties.
NOTIFYALL, NOTIFYFIRST
Default is NOTIFYFIRST.
Defined the same as retry
profiles. See "Retry
Properties" on page 45.
DECT Messaging Installation Guide