Figure 11
Messaging Service screen
2
Click Send a Message. The DECT Messaging Service screen is
displayed. See Figure 11 on page 35.
3
Enter the user number(s) or user group number(s). Separate each
entry with a comma (,). An example of a user group number would be
a number for the Technical Support handset rather than the number of
an individual.
To search for user and group numbers, click the search button on the
right side of the screen. Type a name or partial name and press the
submit button.
For example, if a list of user numbers includes the names Mary and
Maria, then entering Mar would return the number for both names. The
browser displays either a screen allowing a message to be sent to that
number or an error screen if the number was not found.
Using the DECT Messaging system Page 35 of 60
DECT Messaging Installation Guide