64 BCM50 configuration
9
10
11
12
13
Table 28
Assigned DNs fields
Field
DN
Appearance Type
Appearances
Solution Integration Guide for Multisite Business Communications Manager Systems
Copyright © 2007, Nortel Networks
.
In the Task Navigation Panel, in the Configuration tab, select
Telephony > Sets > All DNs.
Highlight the individual line you wish to configure.
Select the Line Assignment tab.
See
Figure 19 "Line Assignment" (page
Figure 19
Line Assignment
Edit the listed DNs, or click Add to add a DN as required.
Enter the appropriate information for your network.
Refer to
Table 28 "Assigned DNs fields" (page 64)
information.
Value
Ring only
Appr&Ring
Appr only
Enterprise: Common
NN49000-303 01.01 Standard
Release 4.0, 3.7 29 June 2007
64).
Description
Unique number
Select Appr Only or Appr&Ring if the telephone
has an available button. Otherwise select Ring
Only.
Target lines can have more than one appearance
to accommodate multiple calls. For telephones
that have these lines set to Ring Only, set to
None.
for configuration