Nortel BCM200 Integration Manual page 34

34 BCM 200/400 Release 4.0 configuration
5
Table 13
Parameters fields
Field
Name
Line Type
Pub. Received #
Solution Integration Guide for Multisite Business Communications Manager Systems
Copyright © 2007, Nortel Networks
.
Select the Parameters tab and enter the appropriate information for
your network.
See Figure 10 "Parameters" (page
"Parameters fields" (page 34)
Figure 10
Parameters
Value
Public
DN:*:
Enterprise: Common
NN49000-303 01.01 Standard
Release 4.0, 3.7 29 June 2007
34). Refer to
for configuration information.
Description
Enter the name for the line, for example, Line241.
If the line is to be shared among telephones,
select Public. If the line is only assigned to one
telephone, select DN:*:.
Confirm the existing number or enter a public
received number (PSTN DID or PRI trunks) that
the system uses to identify calls from the public
network to the target line.
The public received number cannot be the same
as the beginning digits of a line pool access code
or destination code.
Table 13