Configuring H.323 Local Gateway Ip Parameters - Nortel BCM200 Integration Manual

Parameter
4th Preferred Codec
Silence Compression
Jitter Buffer – Voice
Configuring H.323 local Gateway IP parameters
Perform the following procedure to configure local Gateway parameters.
Step
1
2
3
4
Table 17
H.323 local Gateway IP parameters
Parameter
Fallback to Circuit-Switched
Solution Integration Guide for Multisite Business Communications Manager Systems
Copyright © 2007, Nortel Networks
.
Configuring H.323 local Gateway IP parameters 41
Action
Log on to the Unified Manager.
Select the BCM>Services>IP Telephony>IP Trunks>H.323 Trunks
heading.
The Local Gateway IP Interface page appears.
Select Resources>Telephony Resources.
In the Local Gateway IP Interface section, configure the parameters
listed in the table below with the appropriate values for your network.
Enterprise: Common
NN49000-303 01.01 Standard
Release 4.0, 3.7 29 June 2007
Value
None
G.711-aLaw
Enabled
Disabled
Auto
None
Small
Medium
Large
—End—
Value
Enabled-All
Enabled-TDM-only
Disabled