2, Copying A Reverb Type; Copying From A Memory - Roland D-50 Owner's Manual

DATA TRANSFER WITH MEMORY CARD
2. COPYING A REVERB TYPE
On the optional Sound Library Memory Card (ROM), 32 reverb types
(1 to 32) are programmed, 16 (17 to 32) of these reverb types
can be copied to the D—50's internal memory. Also, the reverb
types written in the D—50's memory can be copied to the optional
Memory Card (M—256D).
a. Copying from a Memory Card to the D-—50
step
step
step
step
step
step
step
step.
step
step
68
10
Connect the Sound Library Memory Card (ROM) to the D—50.
Turn the Memory Protect of the D—50 to OFF.(See page 49.)
Call any Patch on the Memory Card.
Call the Output Mode Display (Display 8), and select one of the
Reverb Types (17 to 32) to be copied.
While holding the Shift Key down, push the Write Button.
R11 seiekstomoiohddiokaok Reyer Write
Write to 17. Sure ? CEnter/Exit>
Flashing Number of destination Reverb Type
Push the interna! Button.
Push the center Selector Button.(The number of the destination
Reverb Type flashes.)
Using the Joystcik//Increment and Decrement Buttons, select the
destination Reverb Type (17 to 32) to be replaced with the one
called from the Memory Card.
Hit the Enter Key.
Return the Memory Protect to ON.